Vertical Wave User Manual page 60

Conference Calls
When the other party answers:
3.
4.
5.
ANALOG PHONES
To Set Up a Conference
With a party on the line:
1.
2.
After the conference member answers:
3.
4.
If you dial a member that is not available
Release 3.0
Press TRNS/CONF or TRANS button again to connect the calls.
The number of parties in the current conference call will appear on the display.
If a party is not available, press TAP, or press the button corresponding to the initial call to
reconnect to the first party.
Press TRNS/CONF or TRANS again to place the conference call on hold and
add a fourth party.
Repeat steps 2 through 4 to add additional parties.
Complete the conference by pressing TRNS/CONF or TRANS.
Press Flash, then #.
Dial the phone or extension number of a conference member.
Press Flash and #, then press *71.
or,
Press Flash, then 5.
Repeat for each additional conference member.
Press Flash, then 4 to return to the conference.
Wave Phone User Guide
Using Wave Phone Features
April 2012
-
3 26