Vertical Wave User Manual page 51

Call Waiting
To release the initial call
While the initial call is active, press End Call.
Hint:
"Blocking Caller ID [ALL]" on page 3-18 for more information about the Conference feature.
You can transfer a call waiting call to another extension. See "Transfer" on page 3-61 for more
information about the Transfer feature.
You can park a call waiting call for pickup on another extension. See "Call Pickup" on
page 3-12 for information about parking calls.
To disable Call Waiting
DIGITAL PHONES
To Accept a Call Waiting Call
Note:
feature is not available.
To Reconnect to the Initial Call
Release 3.0
• For 480i/CT, 9480i/CT, and all Aastra Series 5 models: press Goodbye (
the softkey.
DROP
The initial call is dropped and you are reconnected to the call waiting call. The call
waiting call is rolled onto the primary line button.
You can add a call waiting call to a call on your primary line by pressing Conference. See
Press *70, and dial the phone number.
Call Waiting is disabled for the duration of the call. Call Waiting is re-enabled when the
call is terminated.
Press the pre-programmed Call Waiting button.
The initial call is placed on temporary hold.
If your digital phone does not have a programmed Call Waiting button, the Call Waiting
Press the TAP button.
The call waiting call is placed on temporary hold.
You can toggle between the initial call and the call waiting by pressing the TAP button.
The display updates to reflect which caller is connected.
Vodavi/Triad/Infinite phones can not answer a call using a TAP key, ( they only
Note:
Toggle through calls).
Wave Phone User Guide
Using Wave Phone Features
or use
April 2012
-
3 17