IBM Infoprint 1410 User Manual page 64

Media specifications and guidelines
6
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the
print media. Straighten the edges on a level surface.
Hold the print media so the side you want to print on is face down, and the front edge of the
stack is toward the front of the tray.
For information on loading letterhead, see
7
Place the stack of print media against the left side of the tray and insert it under the metal
stop.
Make sure the print media fits easily under the metal stop and is not bent or wrinkled. Do not
raise the metal stop or force print media under it.
Note: Do not exceed the maximum stack height indicated by the maximum stack height
indicator. Overfilling the tray may cause jams.
Printing on
Metal stop
Print media specifications and guidelines
61
letterhead.
Maximum stack height indicator