Clearing Jams - IBM Infoprint 1410 User Manual

Use the following table to locate instructions for jam removal based on the jam message:
Message
290 Scanner jam, remove all originals
from the scanner
291 Scanner jam, remove all originals
from the scanner
292 Scanner jam, remove all originals
from the scanner
293 Scanner jam, replace all originals
if restarting job
200 Paper jam, remove Print Cartridge
to access
201 Paper jam, remove Print Cartridge
to access
202 Paper jam, open rear door to access
230 Paper jam, check duplex
250 Paper jam, check MP Feeder

Clearing jams

To clear this jam, see instructions in these sections
Entering the ADF
In the ADF
Opening top cover during scanning
Jammed due to missing scan media or poor
positioning in the ADF
Jams under the print cartridge
Jams in the tray 1 area
Jams in the tray 2 area
Jams under the print cartridge
Jams behind the upper front door and the rear
output bin door
Jams in the tray 1 area
Jams in the tray 2 area
Jams inside a tray after clearing the metal stop
Jams in the fuser
Jams under the print cartridge
Jams behind the rear output bin door
Before reaching the standard output bin
Exiting to the standard output bin
Jams in the fuser
Jams under the MFP
Jams in the multipurpose feeder
Identifying the media path
82