IBM Infoprint 1410 User Manual page 129

Problem
Faint images or repetitive spots
appear on the page.
Characters have jagged or uneven
edges, or image quality is poor.
The job prints, but the left and top
margins are incorrect.
Printing is too dark.
Troubleshooting
Solution
• Try a different type of print media. Print media designed for
copiers provides the best quality.
• Replace the used print cartridge with a new one. See
Replacing the print cartridge
• Change the Print Resolution
MarkVision Professional, the
pages. Use a print resolution higher than 300 dots per inch
(dpi).
• If you are using downloaded fonts, verify that the fonts are
supported by the MFP, the host computer, and the
application.
• Make sure the Paper Size
driver, MarkVision Professional, the
Web pages.
• Verify that the Print Area
the control panel, or the Web pages is correct. Print a menu
settings page to verify this. For more information, see
Printing the menu settings
• Make sure the margins are set correctly in your application.
• Change the Toner Darkness
MarkVision Professional, the
pages.
• Make sure the lines per inch (lpi) setting is not set too high in
the application.
Solving print quality problems
126
for instructions.
setting in the print driver,
control panel, or the Web
setting is set correctly in the print
control panel, or the
setting in MarkVision Professional,
page.
setting in the print driver,
control panel, or the Web