IBM Infoprint 1410 User Manual page 184

Defaults Menu – Print Settings – Finishing Menu(continued)
Menu item Purpose
Separator To insert blank separator sheets
Sheets
between jobs, between multiple
copies of a job, or between each
page of a job.
Separator To specify the print media source
Source
that holds separator sheets.
Quality Menu
Use the Quality Menu to change settings affecting the quality of printed characters and images.
Note: Values marked by an asterisk (*) are the factory default settings.
Defaults Menu – Print Settings – Quality Menu
Menu item Purpose
Print Resolution To define the number of dots
printed per inch (dpi). The higher
the value, the sharper the clarity of
printed characters and graphics.
Using the MFP control panel and menus
Values and descriptions
None* Does not insert separator sheets.
Between Inserts a blank sheet between
Copies
each copy of a job. If Collation is
Off, a blank page is inserted
between each set of printed pages
(all page 1's, all page 2's, and so
on). If Collation is On, a blank page
is inserted between each collated
copy of the job.
Between Inserts a blank sheet between
Jobs
jobs.
Between Inserts a blank sheet between
Pages
each page of a job. This is useful if
you are printing transparencies or
want to insert blank pages in a
document for notes.
Tray 1* Selects separator sheets from the
specified tray. Tray 2 is only
Tray 2
available if an optional 250-sheet
drawer or an optional 500-sheet is
MP Feeder
installed.
Values and descriptions
300 dpi
600 dpi*
1200 Image Q
Menus
181
Offers a lower resolution
printing option when memory
is at a premium.
Produces high quality output
for print jobs that are mostly
text.
Uses line screening for print
jobs that contain bitmapped
images.