Printing A Font Sample List; Canceling A Print Job From The Mfp Control Panel; Canceling A Print Job From Your Computer; Printing A Directory List - IBM Infoprint 1410 User Manual

Printing a font sample list

To print samples of all the fonts currently available for your MFP:
1
Make sure the MFP is on.
2
Press the Administration (key) button.
3
Press the right arrow button to highlight Print Reports, and then press
4
Press the down arrow button until you reach Print Fonts, and then press
5
Press the down arrow button until you reach either PCL Fonts or PS Fonts.
• Select PCL Fonts to print a listing of the fonts available to the PCL emulator.
• Select PS Fonts to print a listing of the fonts available to the PostScript 3 emulator.
6
Press .
The message Printing Font List appears.

Canceling a print job from the MFP control panel

If the job you want to cancel is printing or in the device print queue:
1
Press the Print/Profiles or Stop button.
2
Press the down arrow button until you reach Cancel Print Jobs.
3
Press . A list of print jobs appears. Use the up and down arrows to scroll through the list.
Highlight the job you need to cancel. Press
4
Use the left arrow button to highlight Delete.
5
Press . The print jobs that you highlighted are then deleted. The message Canceling
print job(s). appears.

Canceling a print job from your computer

Search on your computer for the correct screens that let you cancel or delete your print jobs.

Printing a directory list

A directory list shows all the resources stored in flash memory. To print:
1
Make sure the MFP is on and the Ready message appears on the control panel.
2
Press the Administration (key) button.
3
Press the right arrow button to highlight Print Reports, and then press
Printing, copying, faxing, and scanning
Printing information
.
36
.
.
.