IBM Infoprint 1410 User Manual page 194

Defaults Menu – Print Settings – PCL Emul Menu – PCL Emul Settings(continued)
Menu item Purpose
Pitch To specify the font pitch for
scalable monospaced fonts.
Orientation To determine how text and
graphics are oriented on the
page.
Lines per To determine the number of
Page
lines that print on each page.
A4 Width To select the width of the
logical page for A4 size
paper.
Auto CR To specify whether the MFP
after LF
automatically performs a
carriage return after a line
feed control command.
Auto LF To specify whether the MFP
after CR
automatically performs a line
feed after a carriage return
control command.
Using the MFP control panel and menus
Values and descriptions
0.08...100
(in increments of 0.01 cpi)
10*
Portrait*
Landscape
1...255
60*
(country/region-specific
factory default values)
64*
(country/region-specific
factory default values)
198 mm*
203 mm
Off*
On
Off*
On
Menus
191
Pitch refers to the number of
fixed-space characters in a
horizontal inch of type. You
can select a pitch from 0.08 to
100 characters per inch (cpi)
in increments of 0.01 cpi. For
nonscalable monospaced
fonts, the pitch is displayed,
but cannot be changed.
Note: Pitch is only displayed
for fixed, or monospaced,
fonts.
Prints text and graphics
parallel to the short edge of
the paper.
Prints text and graphics
parallel to the long edge of the
paper.
The MFP sets the amount of
space between each line
(vertical line spacing) based
on the Lines per Page, Paper
Size, and Orientation menu
items. Select the correct
Paper Size and Orientation
before changing Lines per
Page.
Makes the logical page
compatible with the Hewlett-
Packard LaserJet 5 Printer.
Makes the logical page wide
enough to print eighty 10-pitch
characters.
MFP does not perform a
carriage return after a line
feed control command.
MFP performs a carriage
return after a line feed control
command.
MFP does not perform a line
feed after a carriage return
control command.
MFP performs a line feed after
a carriage return control
command.