Network/Usb - IBM Infoprint 1410 User Manual

Print Reports(continued)
Menu item
Fax Delayed/Pending
Log
NetWare Setup Page
Print Fonts
Print Directory

Network/USB

Note: Values marked by an asterisk (*) are the factory default settings.
TCP/IP
Internet Protocol (IP) specifies the format of packets, also called datagrams, and the addressing
scheme. Most networks combine IP with a higher-level protocol called Transmission Control Protocol
(TCP). TCP enables two hosts to establish a connection and exchange streams of data. TCP
guarantees delivery of data and also guarantees that packets are delivered in the same order in
which they were sent.
Network/USB – TCP/IP
Menu item Purpose
Address Defines a specific address on the
network which defines the device.
Netmask Defines information that the network
uses to decide how to search for the
specific IP address.
Gateway Provides the address of the machine that
controls the communication for the sub-
network.
Using the MFP control panel and menus
Purpose
Prints a log of the faxes in the send
queue and faxes received but not
printed. Once a fax prints, it appears in
the Fax Receive Log.
Prints a page listing the NetWare
protocol settings.
Prints a sample of all the fonts available
for the selected printer emulation.
Prints a report showing all the resources
stored in flash memory.
This menu item only appears on the
control panel if there is an installed
optional flash memory card.
Values and descriptions
PCL Fonts
PostScript
Fonts
Values and descriptions
4 field IP
address
4 field
mask
4 field IP
address
Menus
199
Prints a sample
of all MFP fonts
available for
PCL emulation.
Prints a sample
of all MFP fonts
available for
PostScript
emulation.