IBM Infoprint 1410 User Manual page 228

Understanding the MFP control panel messages
Message
53 Unformatted flash
detected
54 Standard Network
Software Error
55 Unsupported Flash
in slot <X>
55 Unsupported Memory
in slot <X>
56 Standard USB Port
Disabled
88 Toner is low
900–999 Service
<message>
Administrator menus
turned off by system
administrator.
After pressing the
green start button the
fax will be
transmitted on
<send date> <send
time>
Continue
Answering
What this message means
The MFP detects unformatted
flash memory.
The MFP cannot establish
communications with an installed
network port.
An unsupported flash option is
installed in the specified slot.
An unsupported memory option is
installed in the specified slot.
Data has been sent to the MFP
through a USB port, but the USB
port is disabled.
The print cartridge is low on toner.
Messages 900–999 relate to
problems that may require service.
The support person has restricted
access to the administration
menus.
The fax job is queued at the time
displayed for delayed send.
The device is answering an
incoming fax.
MFP messages
225
What you can do
Highlight Continue and press
the message and continue printing. You
must format the flash memory before you
can store any resources on it.
If the error message reappears, the flash
memory may be defective and require
replacing.
Program new firmware for the network
interface by way of the USB port.
Remove the unsupported flash option
from the specified slot.
Remove the unsupported memory option
from the specified slot.
See the illustration on page 139
location of the slots.
Make sure the USB Buffer menu item in
the USB Menu is not set to Disabled.
To utilize the remaining toner, remove the
cartridge by gripping the handles with
both hands. With the cartridge arrows
pointing downward, shake the print
cartridge back and forth. Reinstall the
cartridge. You may notice reduced print
quality.
Replace the print cartridge.
Turn the MFP off and check all cable
connections. Turn the MFP back on. If the
service message recurs, call for service
and report the message number and
description of the problem.
See also: Calling for service
See your support person.
Press Start to queue the fax job for
delayed sending.
No action required.
to clear
for the