IBM Infoprint 1410 User Manual page 193

Defaults Menu – Print Settings – PCL Emul Menu(continued)
Menu item Purpose
Tray Note: To configure your MFP to work with print drivers or applications that use different
Renumber
source assignments for the paper trays.
1 Select a print media source.
2 Select a value.
Other Tray Renumber selections
PCL Emul Settings
Defaults Menu – Print Settings – PCL Emul Menu – PCL Emul Settings
Menu item Purpose
Point Size To change the point size for
scalable typographic fonts.
Using the MFP control panel and menus
Values and descriptions
1...1008
(in increments of 0.25 points)
12*
Values and descriptions
Assign N represents the number of the
Tray N
tray, either Tray 1 or Tray 2.
Assign MP Assigns the multipurpose feeder.
Feeder
Assign Man Assigns paper to be manually fed
Paper
from the multipurpose feeder.
Assign Man Assigns envelopes to be manually
Env
fed from the multipurpose feeder.
Off* MFP uses factory default paper
source assignments.
0...199 Select a numeric value to assign a
custom value to a paper source.
None Paper source ignores the Select
Paper Feed command.
View Factory Use the navigation arrow buttons
Def
to display the factory default value
assigned to each paper source.
Restore Select Yes to return all tray
Defaults
assignments to factory default
values.
Menus
190
Point size refers to the height
of the characters in the font.
One point equals
approximately 1/72 of an inch.
You can select point sizes
from 1 to 1008 in increments
of 0.25 points.
Note: Point Size is only
displayed for typographic
fonts.