Letterhead; Transparencies - IBM Infoprint 1410 User Manual

• Coated papers, such as erasable bond
• Preprinted papers manufactured with chemicals that may contaminate the MFP
• Multiple-part forms
• Synthetic papers
• Thermal papers
• Recycled paper having a weight less than 75 g/m

Letterhead

Preprinted papers such as letterhead must be able to withstand temperatures up to 200°C (392°F)
without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner
or the silicone in the fuser. Inks that are oxidation-set or oil-based should meet these requirements;
latex inks might not.
Printing on letterhead
Check with the manufacturer or vendor to determine whether the preprinted letterhead you have
chosen is acceptable for laser MFPs.
Page orientation is important when printing on letterhead. Use the following table for help when
loading letterhead in the print media sources.
Print media source or
process
Tray 1
(standard tray)
Tray 2
(optional 250-sheet or
500-sheet drawer)
Duplex printing using
tray 1 or tray 2
Multipurpose feeder
(including feeding
individual sheets)
Duplex printing using
the multipurpose
feeder
Note: It is possible to load letterhead for simplex (single-sided) or duplex (two-sided)
printing. See

Transparencies

You can feed transparencies from the standard 250-sheet tray or the multipurpose feeder. Try a
sample of any transparencies you are considering using with the MFP before buying large quantities.
Media specifications and guidelines
Print side Portrait
Face down Front of tray
Face up Rear of tray
Face up Logo enters the MFP first
Face down Logo enters the MFP last
Paper Loading
Print media specifications and guidelines
2
(20 lb)
Top of page
for more information.
53
Landscape
Left side of tray
Not applicable
Left side of tray
Not applicable