IBM Infoprint 1410 User Manual page 172

Defaults Menu – Copy Settings(continued)
Menu item Purpose
Collate To keep the pages of a print
job stacked in sequence
when making multiple
copies of the job.
Original Size Provides a list of possible
scanner sizes to select
from to specify the size of
your original copy
document.
Copy To Source Provides a list of possible
print media sources to send
the copy job to for printing.
Darkness Specifies the level of
darkness for the copy job.
Number of Specifies the number of
Copies
copies for the copy job.
Overlay Specifies the selection for
overlay text to print on each
page of the copy job.
The overlay looks similar to
the following on a page:
Allow priority Lets you interrupt a
copies
network print job, so you
can use the MFP as a
copier to copy a page or
document.
Using the MFP control panel and menus
Values and descriptions
On* Copies the entire job the number of times
specified. For example, if you set Copies
to 2 and have three pages to copy, the
MFP output is page 1, page 2, page 3,
page 1, page 2, page 3.
Off Copies each page of a job the number of
times specified. For example, if you set
Copies to 2 and have three pages to copy,
the MFP output is page 1, page 1, page 2,
page 2, page 3, page 3.
• Letter* (* Denotes a country/region-specific
factory default value)
• Legal
• Executive
• Folio
• Statement
• A4*
• A5
• JIS B5
• Tray 1* Tray 2 is not listed as a selection in the
values list unless an optional 250- or
• MP Feeder
500-sheet drawer is installed.
• Tray 2
1–9 (5*)
1–999 (1*)
Confidential Note: The Custom value is not shown
unless text is entered into the Custom
Copy
Overlay text field from the Web page. The
Draft
text used for the overlay is what you
entered on the Web page, but you still
Urgent
select Custom in the menu.
Custom
Off*
On* Interrupts the print job at the next page.
Off Interrupts the print job at the next job
boundary which means between incoming
individual print jobs.
Menus
169