Chapter 7: Administration; Disabling Control Panel Menus; Enabling Menus - IBM Infoprint 1410 User Manual

7
Administration
The following sections are for a support person in charge of the MFP.
Since many people could be using the MFP, an administrator may choose to lock the menus to keep
others from changing menu settings from the control panel.

Disabling control panel menus

To disable the control panel menus so that changes cannot be made to the MFP default settings:
1
Turn the MFP off.
2
Press and hold the Start and Stop buttons while turning the MFP on. Release the buttons
when the Performing Self Test message is displayed.
3
Press the down arrow button until you reach Panel Menus, and then press
4
Press the right arrow button until you reach Disable, and then press
highlighted.
5
Press .
Submitting changes appears briefly and you are returned to the same screen where
Panel Menus is located.
6
Press the down arrow button until Exit Config Menu is highlighted, and then press
.
Resetting the printer appears briefly.
The menus are disabled, the MFP exits the Config Menu and restarts.

Enabling menus

1
Repeat steps 1
2
Press the left arrow button once so you reach Enable and then press
highlighted.
through 3 in Disabling control panel
Administration
menus.
133
.
. Submit is
. Submit is