IBM Infoprint 1410 User Manual page 174

Fax Send Settings
Defaults Menu – Fax Settings – Fax Send Settings
Menu item Purpose
Resolution To define quality in dots per inch
(dpi). A higher resolution gives
greater print quality, but it
increases the fax transmission time
for outgoing faxes.
Width Select the width of your document. 210 mm*
Content Specifies the type of content
contained in the fax job.
Darkness Specifies the level of darkness for
the fax job.
Dial Prefix A numeric entry field is provided to
enter numbers. The previously
entered numbers are shown.
The dial prefix could be a country
code or code businesses use to
dial an outside line.
Automatic Specifies the number of times the
Redial
MFP automatically tries to send
the fax job again by resubmitting
the Fax To number.
Redial Select a range in minutes for the
Frequency
number of redials to occur in that
time span.
Behind a PABX Enables or disables switchboard
blind dialing without a dial tone.
Enable ECM Enables Error Correction Mode for
fax jobs which makes faxing more
reliable.
Allow Save Specifies if the Save button
appears on the Fax Destination
screen, enabling a way to save the
Fax To list as a shortcut.
Dial Mode Specifies the dialing sound, either
as a tone or a pulse.
Note: This setting may not be
available in all countries or regions.
Using the MFP control panel and menus
Values and descriptions
• Standard*
• Fine
• Super Fine
• Ultra Fine
(* Denotes a country/region-
8.5 in.* specific factory default value)
Text The fax job contains text only.
Text/ The fax job contains a mixture of
Graphics*
text and graphics.
Photo The fax job contains photo images
only.
1–9 (5*)
Null* The entry field is limited to 57
characters. If you enter a number
Number
string containing more characters,
string
the field is truncated.
0–9 (5*)
1–200 (3*)
On Do not wait for a dial tone.
Off* Wait for a dial tone.
On* ECM is enabled.
Off ECM is disabled.
On* A Save button appears on the
screen.
Off A Save button does not appear on
the screen.
Tone* A tone sounds for each number
dialed.
Pulse A pulsating noise sounds for each
number dialed.
Menus
171