IBM Infoprint 1410 User Manual page 203

Network/USB – TCP/IP(continued)
Menu item Purpose
Enable DHCP DHCP is Dynamic Host Configuration
Protocol. The network automatically
assigns a number for the network
information.
Enable RARP RARP is Reverse Address Resolution
Protocol.
Enable BOOTP BOOTP is Bootstrap Protocol.
AutoIP Provides automatic IP.
Enable FTP/TFTP Allows files to be transferred to the
device.
File Transfer Protocol (FTP) is the
protocol used on the Internet for
exchanging files. FTP uses the Internet
TCP/IP protocols to enable data transfer.
TFTP is Trivial File Transfer Protocol,
which is a simple form of FTP.
HTTP Server Specifies if Web pages can be seen.
Enabled
HyperText Transfer Protocol (HTTP), the
underlying protocol used by the World
Wide Web. HTTP defines how messages
are formatted and transmitted, and what
actions Web servers and browsers
should take in response to various
commands.
HTTP Config Defines if settings can be changed in the
Enabled
Configuration Link on the Web page.
Using the MFP control panel and menus
Values and descriptions
On*
Off
On*
Off
On*
Off
On*
Off
On*
Off
On*
Off
On*
Off
Menus
200
The function is enabled.
The function is disabled.
The function is enabled.
The function is disabled.
The function is enabled.
The function is disabled.
The function is enabled.
The function is disabled.
The function is enabled. Web
pages can be seen.
The function is disabled.
The function is enabled.
The function is disabled.