IBM Infoprint 1410 User Manual page 231

Understanding the MFP control panel messages
Message
Insufficient
resources. Try again
when the system is
idle.
Invalid password
Invalid PIN for user
name.
Invalid Standard
Network Code
Job cannot be deleted
Line Busy
Load <source> with
<new media>
Load Manual Feeder
with <new media>
Manual fax turned off
by administrator.
No Answer
No dial tone
No jobs selected.
No profiles to select. No profiles are stored in the
What this message means
System resources are dedicated to
finishing other jobs, so no new jobs
can be set up.
The password entered does not
match the password protecting
administrative functions.
The Personal Identification
Number (PIN) you entered does
not match the user name you
selected. After three seconds, the
screen returns to the list of user
names.
The code in an internal print server
is not valid. The MFP cannot
receive and process jobs until valid
code is programmed into the
internal print server.
Fax jobs already received cannot
be deleted. Print jobs may be also
be made undeletable with PJL
commands.
The device tried to dial a fax
recipient, but the line was busy.
Print media is required to finish a
print job.
Print media is required to finish a
print job.
Your support person has restricted
access to the manual fax function.
The device tried to dial a fax
recipient, but there was no answer.
The device cannot establish a dial
tone to begin faxing.
No job from the list is selected
(shown with an "x") for printing or
deleting.
system.
MFP messages
228
What you can do
Wait for all jobs to finish processing.
Delete print and hold jobs.
Install additional memory.
Re-enter the password.
See your support person.
Reselect your user name and enter the
correct PIN.
For more information, see
Download valid code to the MFP internal
print server. No button actions are
possible while this message is displayed.
You can download network code while this
message is displayed.
See also: Technical Reference
Wait for the job to finish.
No action required. The next fax recipient
is dialed. The recipient with the busy line
is queued for redial after a waiting period.
Load the indicated source with the
requested size and type print media.
Load the manual feeder with the
requested size and type print media.
See your support person.
No action required. The next fax recipient
is dialed. The recipient who did not
answer is queued for redial after a waiting
period.
Check your phone cable connections.
Check your Behind PABX setting.
Select a job to print or delete.
Create a profile using your computer.
Entering a PIN.