Problem
A jam message remains on the
control panel even though you
cleared the jam.
While in PostScript 3 or PCL
emulation, the MFP is flushing
data (Flushing buffer remains
on the control panel).
Troubleshooting
Solution
• Make sure you cleared the entire paper path.
.
• Press
• Open and close the upper front door to restart the MFP.
• Make sure the print cartridge is installed.
• Make sure you are using the correct PostScript driver.
• The MFP does not have enough memory to print the job.
Install more memory. Refer to the Setup Guide for information
about installing optional memory cards.
Solving printing problems
122