FS-6020
(2) Detaching and refitting the paper feed unit
Perform the following procedure when the paper feed unit is to be checked or replaced.
Procedure
1. Remove the top cover (see page 1-6-2).
2. Remove the left cover (see page 1-6-3).
3. Remove the right cover (see page 1-6-4).
4. Remove one connector from the engine/high
voltage PWB.
5. Remove the hook of ground spring.
6. Remove the feed clutch and bush.
1-6-8
Connector
Engine/high voltage PWB
Ground spring
YC10
Figure 1-6-7
Bush
Feed clutch
Figure 1-6-8