Installing USB Drivers
Windows Device Manager: USB driver components
Updating Software
The software for your Aastra 142d can be updated using a USB data cable.
Carry out the following steps to update the software for your Aastra 142d:
1.
Install the USB driver (see Installing USB Drivers starting on page 105) and connect
the Aastra 142d to your PC.
2.
Start the programme for updating the software of your Aastra 142d.
3.
Follow the instructions of the PC programme to carry out the software update.
After the programme has determined the configuration, your telephone is
switched off.
4.
Switch the device on again while holding down the
R
pressing the
106
key. Now your telephone software is updated.
F
arrow key and then