Network - Eneo BCR-3004 Operating Instructions Manual

6.4.5 BUZZER List Option Item
The „BUZZER" list option item is selectable from „EVENT" group icon.
By selecting „BUZZER" list option item, window with „BUZZER" tab appears.
In this window configuration of Buzzer to be on or off is set.
If Buzzer Menus are Off, buzzer will not be activated even Alarm/Motion/Loss Menus are On.

6.5 Network

6.5.1 LAN List Option Item
The „LAN" list option item option is selectable from „NETWORK" group icon.
By selecting „LAN" list option item, window with „ETHERNET" tab, „DDNS" tab and „TRANSMISSION" tab appears.
1) ETHERNET Tab Window
Setup to enable viewing live screen or searching/backup recorded data on HDD remotely over the network.
Dynamic IP Type
• KEY BEEP: Set „ON" or „OFF" to enable and
disable audible beep for mouse, frontal key pad or
remote controller entry.
• VIDEO LOSS: Set „ON" or „OFF" to enable and
disable audible beep for Camera Loss.
• ALARM-IN: Set „ON" or „OFF" to enable and
disable audible beep for detection of external
sensor input.
• MOTION DETECT: Set „ON" or „OFF" to enable
and disable audible beep when motion is detected.
• MAC ADDRESS: Media Access Control protocol
(MAC) address. This is unique ID given to Network
Interface Card (NIC) and is never duplicated.
(Unique NIC ID)
• IP TYPE: If Dynamic IP is selected, only IP Port
can be set, and if Static IP is selected, you can
setup all values. When Dynamic IP is selected,
DHCP button will be activated.
When DHCP button is pressed then the DVR will
negotiate with DHCP server device to obtain a
new lease of available IP given by DHCP server.
As new IP is obtained current lease time will show
on Status box.
48