Remote Viewer - Eneo BCR-3004 Operating Instructions Manual

8.3 Remote Viewer

1) DVR connection setup: Input IP address, Port number, ID, Password
2) System Information: Displays DVR connection and progress status.
3) PTZ Control: Control PTZ cameras connected to DVR
(PTZ setting in DVR must be completed to enable operation of PTZ.)
4) Connect: Connect to DVR via network to view live image.
Disconnect: Disconnect network connection
5) Setup: Set quality and frame rate for each camera channel.
6) Channel selection: Select a channel or a group of channels to display in full screen mode or in 4/9/6 split
screen mode.
7) Screen division: Select layout of split screen
85