Eneo BCR-3004 Operating Instructions Manual page 56

6.6.3 STORAGE List Option Item
The „STORAGE" list option item is selectable from „SYSTEM" group icon.
By selecting „STORAGE" list option item, window with „INFORMATION" tab appears.
Shows HDD total capacity, start time/end time of recorded data and can format HDD.
When format button is pressed, new window pops up to confirm. Press Format button again to begin clear HDD.
to the DVR due to unforeseen restriction with
SNTP provider. If this event happens please
obtain a different SNTP server IP address and
retry.
• RETRY COUNT: Select from  to 30 retries
• INTERVAL: Automatic Sync Interval (0.5, , , 3, 4,
5, 6, , 4 hours)
• LAST SYNC TIME: Shows time of Last Sync.
• TOTAL CAPACITY: Shows total size of HDD
(size of HDD, size of HDD)
• USED SPACE: Shows total size of recorded image
data.
• USED PERCENT: Shows the percentage of
recorded image data.
• START TIME: Shows current start time of recorded
data on HDD.
• END TIME: Shows current end time of recorded
data on HDD.
• RECORDED TIME: Total number of days from Start
Time till End Time.
• FORMAT: Format HDD and clear all data from Hard
Disk Drive.
(initiates FORMAT HDD popup window illustrated
below)
56