Eneo BCR-3004 Operating Instructions Manual page 21

After selecting „DISPLAY" and a window will appear with „OSD", „MAIN", „SPOT" and „VGA" tabs.
Select „MAIN" tab and here you can configure sequence interval.
7) PIP: On / Off
Picture in Picture (PIP) mode will be enabled by selecting PIP button on the remote con-
troller or in frontal keypad. With mouse operation, PIP will be enabled from „MONITORING"
popup menu then selecting „PIP". From here you have an option to select „ON" or „OFF" to
enable and disable PIP.
To configure PIP, from „Monitoring" popup menu select „Setup Menu" you will see setup
menu with five large icons.
Very first icon on the left is „Display" icon and within „Display" icon you will see „DISPLAY", „CAMERA", „AUDIO" and
„REMOTE CONTROL" options. Then select „Display" list option item.