Eneo BCR-3004 Operating Instructions Manual page 19

• Previous Page
By selecting „PREVIOUS PAGE" option in full screen mode, screen display view will switch screen to lower number
channel. (After channel , it rotates to channel 6.)
In split screen mode, clicking Previous Page menu will switch screen to lower number channel groups.
e.g. [ch//3/4] –> [ch3/4/5/6] –> [ch9/0//] –> [ch5/6/7/8]
In 6 split display mode, this function is not available.
• Next Page
By selecting „NEXT PAGE" option in full screen mode, screen display view will switch screen to higher number
channel. (After channel 6, it rotates to channel ).
In split screen mode, clicking Next Page menu will switch screen to higher number channel groups.
e.g. [ch//3/4] –> [ch5/6/7/8] –> [ch9/0//] –> [ch3/4/5/6]
In 6 split display mode, this function is not available.
3) PTZ CONTROL (invokes PTZ Control Toolbar and Virtual Joystick)
Select „PTZ CONTROL" from „MONITORING" popup menu.
NOTE: By pressing button marked „PTZ" on frontal key pad or remote controllers on single channel view will
invoke PTZ Control Toolbar and Virtual Joystick as well.
PTZ Control Toolbar and Virtual Joystick will display when PTZ Control menu is selected while in a single channel
view.
Frontal Key Pad and Remote Controller operation:
Locate sequence button marked „SEQ" and this button will shift keys in PTZ Control Toolbar and press button marked
„ " (for Frontal key pad) or „OK" button (for Remote controllers)
Directional buttons will control the Virtual Joystick, however diagonal controls is not operable via the directional
button. (Recommend using Mouse for diagonal controls).
See Chapter 8.1 Live Monitoring, 5) PTZ mode for more details.
PTZ Control Toolbar
Virtual Joystick
9