Eneo BCR-3004 Operating Instructions Manual page 22

After selecting „DISPLAY" and a window will appear with „OSD", „MAIN", „SPOT" and „VGA" tabs. Select „MAIN" tab
and here you can configure PIP and DURATION.
PIP positioning option may be selected from „PIP" section in „MAIN" window.
There are 8 positions ranging from 0~7. See below for each position.
8) Panic (Force recording)
Panic recording will be enabled by selecting „PANIC" from 'MONITORING" popup.
PIP Position location
Panic recording may be enabled from „MONITORING" popup menu then
selecting „PANIC". Choosing „ON" will enable Panic record mode and „OFF"
will disable Panic record mode.
Panic mode indicator will be shown after Panic mode has been enabled.
It will appear on upper left corner of the screen as show on the picture below.

Example of panic Indicator