Eneo BCR-3004 Operating Instructions Manual page 75

3) Turn off the Modem provided by the ISP, and turn on again.
(This process is to reset client's MAC from ISP. Wait for 30 seconds after turning on.)
4) After the modem is completely powered on (check LED indicators on the modem to verify), turn the DVR off and
turn on again.
5) Access Menu - Network - LAN - Ethernet in DVR.
6) Set IP TYPE to Dynamic and click DHCP button, and IP address and Gateway will be read automatically.
7) Set IP Port. (50000 recommended and is default on DVR)
8) Save settings and exit menu
9) Access DVR with IRS program
75