6.4 Event
6.4.1 ALARM List Option Item
The „ALARM" list option item is selectable from „EVENT" group icon.
By selecting „ALARM" list option item, „ALARM-IN" tab window appears.
1) ALARM-IN Tab Window
Set sensor On / Off and Dwell time for each channel in case external sensor activates.
• NO.: Click the „NO. (Number)" button to show
the „COPY SETTINGS" popup menu.
(There are alarm channels 1~4 shown by
default).
• TYPE: Set external sensor input NO/NC/OFF for
each camera.
• BEEP: Set beeping sound „ON" or „OFF" in the
event of triggering of alarm.
• ALARM-OUT: Set Alarm-Out On / Off in case
sensor input is detected. For 6 Channel DVR
there are two sensor output port is available as
shown on the picture above.
• DURATION: Set dwell time configurable between
to 99 seconds.
• EVENT REFRESH TIME: Set interval time
configurable between to 99 seconds.
• PREVIOUS: Go to previous channel page.
(not available in 4 channel DVR)
• NEXT: Go to next channel page.
(not available in 4 channel DVR)
N.O = Normal Open Type
N.C = Normal Close Type
44