Power Cable - Eneo BCR-3004 Operating Instructions Manual

4.2.3 Camera
Connect cameras to the camera input on rear panel of DVR marked CAMERA IN.
4.2.4 Monitor
Connect the video output marked MONITOR to VIDEO-IN of Main Monitor.

4.2.5 Power Cable

Connect DC V, 6.67A Adaptor to the back side of Power Jack for proper operation
of HDDs and optical drive.
Before turning on, be sure all necessary devices such as Power
adaptor, cameras and Monitor are connected properly to DVR!
NOTE: This unit is for 12VDC. Inadequate supply of power may cause breakdown.
Must use UL approved surge protector and highly recommend UL approved UPS power strip for
unwanted shutdown of the DVR unit.
Improper shutdown and power surge will damage the DVR unit.
Be sure to power off DVR when connecting external devices.
3
Rear view of camera