Eneo BCR-3004 Operating Instructions Manual page 25

5.3.2 PTZ CONTROL Popup Menu
The „PTZ CONTROL" popup menu is available after invoking PTZ Control Toolbar and Virtual Joystick. (see page 9
item „3) PTZ CONTROL" )
Press „Menu" button on remote controller or frontal key pad. For the mouse operation right mouse button click to
invoke „PTZ CONTOL" popup menu
NOTE: Detailed operation of „PTZ CONTROL" menu is illustrated on Chapter 7.1.5 PTZ.
Menus from 1) to 7) may not be available according to PTZ camera models.
Upon clicking „SELECT CHANNEL" selectable list of all camera labels will appear.
Choose the camera label desired to move to the camera for PTZ control.
Upon clicking „GOTO PRESET" selectable list of camera preset labels will appear.
(default „POSITION "~ „POSITION 0").
Select the preset position to view programmed preset position.
The „SET PRESET" option is used to configure preset as seen on the screen.
The „CLEAR PRESET" option is used to delete preset configured by „SET PRESET" option.
First identify preset you want to delete then use „GOTO PRESET" option to select proper
preset number. When PTZ is moved to the desired preset to delete then select „CLEAR
PRESET" to delete the preset.
1) Tour: Pan/Tilt on all directions
2) Pattern: Move designated PRESET position in order
3) Auto Pan: Pan left/right automatically
4) Power: On/Off
5) Light: Light on at night
6) Wiper: Wipe moisture or water drops
7) Pump: Pump water to remove dust
8) Device Menu: Show OSD Menu of PTZ camera
9) Exit PTZ Control: Exit and go back to Live view mode
5