Eneo BCR-3004 Operating Instructions Manual page 61

For PAN left and right, press LEFT and RIGHT buttons, and for TILT up and down, press UP and DOWN buttons.
For ZOOM IN, press Wide button, and for ZOOM OUT, press Tele button. For focusing, press NEAR or FAR buttons.
Button Function
1 / TELE
ZOOM IN
2 / WIDE
ZOOM OUT
3 / NEAR
FOCUS NEAR
4 / FAR
FOCUS FAR
5 / ON
POWER ON
6 / OFF
POWER OFF
7 / OPEN
IRIS OPEN
8 / CLOSE
IRIS CLOSE
9 / SET
SET PRESET
10 / CLEAR
CLEAR PRESET
Button
11 / GOTO
12 / AUTO
Set preset position for PTZ cameras. Press SET PRESET button or click
Set Preset from PTZ Control popup menu.
By setting the position of cameras, user can view the area of preset position
of cameras easily. When camera is in desired position, click Set Preset button,
and Position selection menu pops up.
Click the number to assign the position. To load the Preset, click Goto Preset
button, and Position selection menu pops up. Click the number of position,
and the camera will automatically move to the preset position.
6
Function
GOTO PRESET
AUTO SCAN
TILT UP
TILT DOWN
PAN LEFT
PAN RIGHT
PAN LEFT/TILT UP
PAN RIGHT/TILT UP
PAN LEFT/TILT DOWN
PAN RIGHT/ TILT DOWN