Avaya S8500 Installing And Configuring page 91

Figure 13: Rear view of S8500B Media Server
Figure notes:
1. Speed 1 Gbps LED on Eth 0.
4. Speed 1 Gbps LED on Eth 1.
2. Transmit/receive activity LED on Eth 0.
3. Transmit/receive activity LED on Eth 1.
Note:
On the S8500C, the Ethernet ports are located below the dual NIC but the port
Note:
LEDs have the same location and function as shown in
Figure 2: S8500C back panel
For more information on LEDs, see Maintenance Procedures for Avaya Communication
Manager, Media Gateways and Servers, 03-300432.
Installing and Configuring the Avaya S8500 Media Server
2
1
2
4 3
When lit, these LEDs indicate that the Ethernet network
speed is 1 Gbps. When off, these LEDs indicate that the
Ethernet network speed is 10 Mbps or 100 Mbps.
When lit, these LEDs indicate activity between the media
server and the network.
on page 15.
S8500 LEDs
h2ms85b KLC 101904
Figure 13. See
June 2006
91