Figure 6: SAMP connections for S8500C
4
Figure notes:
1. SAMP Eth2—to the services laptop
computer (cross-connect CAT5 cable)
2. SAMP Eth1 (not used)
About SAMP software
The SAMP is shipped from the factory with the software installed and with some default
settings. However, you might need to install an updated version of the software, and you must
configure the SAMP before you can use it.
If a SAMP software update file is available on the Avaya Support website, one of the
preinstallation tasks required that you load the file on your laptop: see Using the Avaya Server
Availability Management Processor (SAMP) (03-300322) for how to install software on the
SAMP and change the default settings.
Installing and Configuring the Avaya S8500 Media Server
Slot 1
2
1
3
About the Server Availability Management Processor
1
2
3. USB connection for the modem
4. External power to the SAMP
Slot 2
h2ms85cs LAO 051906
23
June 2006