Avaya S8500 Installing And Configuring page 28

Chapter 1: Introduction
.Table 4 lists the possible uses of the PE interface for an S8500 primary controller.
Table 4: Use of the PE interface for a simplex S8500 primary controller
Possible functions of
the PE interface
Registration
H.248 gateway
registration
H.323 endpoint
registration
Adjunct connectivity
28
Installing and Configuring the Avaya S8500 Media Server
Status of the function
on the S8500 Media
Server
The PE interface is
enabled for registration
on a simplex main server.
H.248 gateway
registration is allowed on
the S8500 main server
using the PE interface.
H.323 registration is
allowed on the S8500
main server using the PE
interface.
Adjunct connectivity is
allowed on the S8500
main server using the PE
interface.
Administration needed?
No. The Communication Manager
software automatically enables the
use of the PE interface for
registration.
Yes. You perform the administration
to allow H.248 registration on the PE
interface of the S8500 main server on
the ip-interfaces procr form.
Yes. You perform administration to
allow H.323 registration of the PE
interface of the S8500 main server on
the ip-interfaces procr form.
Yes. To administer adjuncts, you must
use the ip-services form or the
communication-interface
processor-channels form before the
survivable-processor form.
June 2006