Chapter 1: Introduction; Audience - Avaya S8500 Installing And Configuring

Chapter 1: Introduction

Use these procedures to install Avaya Communication Manager and configure a new Avaya
S8500 Media Server and the associated components in an IP-connected port network (IP-PNC)
configuration.
To configure the media server, use the Avaya Installation Wizard. To configure gateways and
other hardware components, use the following two administration interfaces:
The Maintenance Web Interface
●
The command line interface, either directly or through Secure Shell (SSH), Telnet, or a
●
terminal emulation program such as Avaya Native Configuration Manager.
This installation document includes the following information:
Pre-installation requirements
●
Configuring the SNMP modules in the UPS
●
Configuring the SNMP subagent in the Avaya Ethernet switch (if used)
●
Media server configuration
●
Configuring the dual network interface card
●
IP interface translations
●
IP interface configuration
●
Postinstallation administration
●
Installation verification
●
Media server access
●
Installation troubleshooting
●

Audience

This documentation is for the following people who install and configuring the media server
components:
Trained field installation and maintenance personnel
●
Technical support personnel
●
Authorized Business Partners
●
Installing and Configuring the Avaya S8500 Media Server
on page 9
on page 47
on page 59
on page 63
on page 83
on page 89
on page 99
on page 109
on page 35
on page 55
on page 39
7
June 2006