When Not Using For A Long Term (Custody Wash) - MIMAKI JV33-130 Operation Manual

When not using for a long term (CUSTODY WASH)

When the operation of the machine is to be suspended for a week or more, use the [CUSTODY WASH]
function to clean the nozzles in the heads and the ink discharge passage.
After the cleaning, store the machine properly.
Check the follow-
ings in advance.
• When the following messages are indicated, check the waste ink tank, and then operate it,
referring to P.4-42 "If Waste ink tank confirming message is displayed" according to the situa-
tion.
1
Press the
mode.
2
Select [CUSTODY WASH] by pressing
the
3
Press the
• The carriage moves onto the platen.
4
Clean the wiper and the bracket.
(1) Open the front cover then pull out it by holding projections at both ends of the wiper.
(2) Clean it with a clean stick dipped in the cleaning solution.
( Aqueous ink : SPC-0137, Solvent ink : SPC-0369)
(3) Insert it in the original position by holding the projections at both ends of the wiper.
4-14
Is [NEAR END] or [NEAR END] displayed ?
• The cleaning solution or ink is absorbed in washing.
At this time, washing is unable to operate if the ink end or near-end is
detected.
• Replace it with a cartridge undetected for the ink end or the like.
C o n f i r m a w a s t e t a n k
C o n t i n u e < > E x c h a n g e
key in the local
keys.
key.
C o n f i r m a w a s t e t a n k
E x c h a n g e : e
S T . MA I N T E N A N C E
C A R R I AG E OU T
S T . MA I N T E N A N C E
CU S T OD Y WA S H
W I P E R C L E A N I NG
COMP L E T E D ( N E X T )
n t
< e n t >
< e n t >
: e n t
Projection