Polycom SpectraLink 8020 Administration Manual page 33

PN: 1725-36038-001_B.doc
Authentication
Select either
Open System
WEP Enable/Disable
Select either
Enable WEP
Key Information
Enter the key number specified for use by the
Default Key
handsets. This will be
Select either
Key Length
length specified for use at this location.
Scroll to the key option that corresponds to the
Key 1-4
that was entered above. Enter the encryption key as a
Key
sequence of hexadecimal characters. (Use the
access hexadecimal digits A through F.
Rotation Secret
This is used for proprietary WEP key rotation. Refer to your
custom document if this feature is supported in your system.
The security features of WPA2 (Wi-Fi Protected Access)
WPA2-PSK
using PSK are available and may be used if supported by the APs in
the facility. Select either
eight and 63 characters in length or
bit key code.
The security features of WPA (Wi-Fi Protected Access)
WPA-PSK
using PSK (pre-shared key) are available and may be used if
supported by the APs in the facility. Select either
a passphrase between eight and 63 characters in length or
and enter the 256-bit key code.
Key
(Fast Secure Roaming) In order to provide the highest level
Cisco FSR
of security without compromising voice quality on Cisco Aironet
wireless LAN APs, Polycom and Cisco Systems have cooperated to
implement the Fast Secure Roaming mechanism. FSR is designed to
minimize call interruptions for SpectraLink 8020/8030 Wireless
Telephone users as they roam throughout a facility. Existing Aironet
350, 1100, and 1200 APs may require a firmware upgrade to support
FSR. Cisco FSR requires advanced configuration of the Cisco APs in
your site. See your Cisco representative for detailed documentation
on configuring the APs and other required security services on the
wired network. To configure Cisco FSR on a handset, you must enter
a Radius Server username and password into each handset.
SpectraLink Wireless Telephone Configuration
or .
Shared Key
or .
Disable WEP
through .
1 4
or
40-bit 128-bit
and enter a passphrase between
Passphrase
Pre-Shared Key
depending on the key
Default
and keys to
2 3
and enter the 256-
and enter
Passphrase
Pre-Shared
33