Diagnostics - Polycom SpectraLink 8020 Administration Manual

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

Diagnostics

36
and 802.11 mode are listed. Navigate to the desired level and
press . This sets the transmit power level and exits the
NavOK
Regulatory Domain
display.
Run Site Survey
The mode is activated by selecting this option. The site
Site Survey
survey starts running immediately upon selecting this option. See the
Diagnostic Tools section for more information about site survey.
Diagnostics Mode
Diagnostics can be enabled or disabled. See Chapter 8 Diagnostic Tools,
section Diagnostics Enabled for a detailed explanation of the
mode options.
Syslog Mode
See Chapter 8 Diagnostic Tools, section Syslog Mode for a detailed
explanation of the
Syslog
Error Handling Mode
The mode determines how the handset will behave
Error Handling
when an error occurs. The
to stop operating if an error message is received. Unless the error is a
fatal one, normal operation may be resumed by power-cycling the
handset. The
Restart on Error
every effort to reboot quietly and quickly to standby mode. In either
scenario, a call in progress will be lost.
Error detail may be shown on the display, captured by the syslog
server and may also be available for downloading with the Handset
Administration Tool.
menus. The
Network Setup
mode options.
option will cause the handset
Halt on Error
option will cause the handset to make
menu will again
Diagnostics
PN: 1725-36038-001_B.doc