Polycom SpectraLink 8020 Administration Manual page 35

PN: 1725-36038-001_B.doc
Use if all of your infrastructure devices use only 802.11g. The
g only
handsets will operate up to 54 mb/s in this mode.
Use if some of your infrastructure components only
b & b/g mixed
understand 802.11b. The handsets will operate up to 11 mb/s.
Subbands have not been established for the
mode at this writing. Provision is made in the software to
g only
accommodate these ranges once established. Newly added
subbands may not appear in the above table.
Subband
Once a mode is set the subband list will display, if applicable.
Only those ranges which are allowed in the set regulatory domain
and that pertain to the set mode are displayed. Note that for
802.11a the bands labeled
regulatory domain. Multiple subbands may be set. Navigate to the
desired subband and set with
will open. Once the
returned to the subband list.
To deselect a subband, navigate to it and press
Once the subband settings are as desired, press the
exit to the
Network Setup
Transmit power
For subbands: The
pressed from the
required for each subband. Only one level may be set per
subband. Only those power levels which apply to the
regulatory domain and 802.11 mode are listed. Navigate to the
desired level and press
list. Another subband may be selected which repeats the
process.
If the highlighted power transmit level is legal on all of the
subbands for the set mode, an
softkey to apply that level to all subbands and return to the
All
subband menu where all subbands will now be selected.
overrides any previously set power transmit levels.
Without subbands: When the 802.11 mode has no subbands, the
list opens when
Transmit Power
mode. Only those power levels which apply to the domain
SpectraLink Wireless Telephone Configuration
will vary depending on the set
DFS
The
NavOK.
setting is done, you will be
Transmit Power
menu.
list opens when
Transmit Power
menu. A transmit power setting is
Subband
to set and return to the subband
NavOK
softkey will appear. Press the
All
NavOK
or the
b and b/g mixed
menu
Transmit Power
.
NavOK
softkey to
Done
is
NavOK
All
is pressed to set the
35