Relation Between Print Image And Saddle Stitch - Sharp LASER PRINTER Operation Manual

SADDLE STITCH FINISHER

Relation between print image and saddle stitch

When saddle stitch is performed, the orientation of image data or original is related to the orientation of paper
complicatedly. The table below shows the requirements of the image and the saddle stitch.
Left
binding
Portrait
orientation
printing
Right
binding
Landscape
orientation
printing
NOTES
G Required settings for the illustration above are shown below.
* Available paper sizes are 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", A3, B4, A4, and B5 (stapling capacity is up to
50 sheets for 8-1/2" x 11", A4 and B5, and up to 25 sheets for other sizes).
* Portrait orientation or landscape orientation must be selected.
G Select only one paper size. If different sizes are included, stapling cannot be performed.
NOTE
Stapling cannot be performed onto the following types of paper.
Pre-punched paper, transparency film, heavy paper, label, envelope, Japanese postcard
5-28
Image data or original
First page Second page
(front side) (reverse side)
Third page Fourth page
(front side) (reverse side)
Same as above
First page Second page
(front side) (reverse side)
Third page Fourth page
(front side) (reverse side)
Result
Two sides
Two sides
Two sides
Two sides