Saddle Stitch Finisher Functions; Sort Mode; Group Mode; Offset Mode - Sharp LASER PRINTER Operation Manual

Laser printer
Hide thumbs Also See for LASER PRINTER:
Table of Contents

Advertisement

SADDLE STITCH FINISHER
Name
Stapling position
Reference paper position
Power supply
Dimensions
Weight
Name
Number of punch holes/
hole diameter
Hole pitch
Punching capacity
Specifications are subject to change for improvement without notice.
Supplies
For the saddle stitch finisher, the following staple cartridge is needed as supplies.
G Staple cartridge (Approximately 2,000 staples x x)
xxxx

Saddle stitch finisher functions

I Sort mode
Each set will be sequentially printed and delivered.
Original
I Offset mode

Offset mode

5-18
Saddle stitch finisher
Upper tray: two types (one at rear, one at front)
Lower tray: 4-47/64" (120 mm) pitch from the center of paper
Center
Drawn from the power supply unit (peripheral unit)(See page xx.)
xx-x/x" (W) x xx-x/x" (D) x xx-x/x" (H) (xxx mm (W) x xxx mm (D) x xxx mm (H))
Approx. xxx lbs. (xx kg)
Punch module
2 holes/x-x/x" or xx mm
x-x/x" or xx mm
xx sheets
Printouts
Non-offset mode
I Group mode
All copies of the same page will be grouped.
Original
The offset tray moves from side to side so that each
set is offset from the previous set and each set can
be easily taken out. (The offset function operates
only in the offset tray.)
When the staple sort function is selected, the offset
function will not operate.
Printouts

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents