Sharp LASER PRINTER Operation Manual page 102

KEY OPERATOR PROGRAMS
When using the operation panel with touch panel:
1 Press the [CUSTOM SETTINGS] key.
2 Touch the KEY OPERATOR PROGRAMS key.
ADDRESS
RECEIVE MODE
CONTROL
KEY OPERATOR PROGRAMS
3 Use the numeric keys to enter the five-digit
password.
KEY OPERATOR CODE
KEY OPERATOR CODE
Supplementary explanation of key operation for key operator programs
(when using the operation panel with touch panel)
KEY OPERATOR PROGRAMS
NETWORK SETTING
IP ADDRESS SETTING
ENABLE NetWare
ENABLE NetBEUI
XXX
If is displayed as an item, the setting screen will be displayed by touching the key.
If is displayed to the left of an item, a check mark (
will be set. If you touch
cleared and the setting will be canceled.
If the setting items are displayed on multiple screens, the screen can be switched by touching the [ ] or [ ] key.
If you touch the [EXIT] key, the previous screen will appear again.
The number that has been set is displayed.
Numbers can be set by touching the [ ] or [ ] key.
6-6
Each time a number is
entered, the dashes (-) in
the display will change to
asterisks ( ). For the factory
*
default setting of the key
operator code number
(password), see page xxxx.
ENABLE TCP/IP
ENABLE NetWare
when a check mark (
4 Touch the key of the desired category of the key
operator programs.
ACCOUNT
ENERGY SAVE
CONTROL
PRINT SETTINGS
COPY SETTINGS
KEY OPERATOR CODE
PRODUCT KEY
CHANGE
5 Press the [CUSTOM SETTINGS] key.
For details of each program, see the description on and
after the next page.
6 Press the [CUSTOM SETTINGS] key.
OK
1/2
) will be displayed by touching
) has been already displayed, the check mark will be
<Example>
For registration of the key
operator code number,
touch "KEY OPERATOR
CODE CHANGE".
(1-999)
20
SEC.
and the program