Entering Characters; Entering Alphabetical Characters - Sharp LASER PRINTER Operation Manual

ENTERING CHARACTERS

To enter or edit characters in setting screens such as auto dial key programming screens, follow the steps below.
Characters that can be entered are alphabetical characters, special characters, numbers, and symbols.

Entering alphabetical characters

(Example: Sharp äÄ)
1
Touch the S key.
To switch between upper case and lower case, touch
the ABC abc key. When ABC is highlighted, upper
case letters are entered.
2
Touch the ABC abc key.
S
3
Touch the "h" key, "a" key, "r" key, and "p" key.
Shar
If you make a mistake, touch the
( ) back one space and then enter the correct character.
You can also press the AB/ab
to enter a number or symbol.
4
Touch the SPACE key.
Sharp
The cursor ( ) moves forward and a space is entered.
Characters cannot be
entered beyond the " " mark.
key to move the cursor
12#$% key during entry
5
Touch the ÃÄÂ/ãäâ key.
Sharp
6
Touch the "ä" key.
Sharp
To switch between upper case and lower case, touch
the ÃÄÂ ãäâ key. When ãäâ is highlighted, lower case
letters are entered.
7
Touch the ÃÄÂ ãäâ key.
Sharp ä
8
Touch the "Ä" key.
Sharp ä
You can press the ABC/abc key during entry to return to
alphabetical character entry. You can also enter numbers
and symbols.
9
When finished, touch the OK key.
Sharp äÄ
You will exit the character entry screen and return to the
programming screen. If you touch the CANCEL key, you
will return to the programming screen without storing
the entered characters.
6
6-15