Interrupting A Print Or Copy Run - Sharp LASER PRINTER Operation Manual

INTERRUPTING A PRINT OR COPY RUN

INTERRUPT can be used to temporarily stop a long print or copy job so that another copy job can be run. Only copy
jobs can be run during interrupt.
1
Place the original in the document feeder tray
or on the document glass. (page 7)
2
Touch the [INTERRUPT] key.
0
INTERRUPT
ORIGINAL
8 11
1
X
/ AUTO
2
EXPOSURE
AUTO
8 11
1
X
/
2
PAPER SELECT
100 %
0
CANCEL
ORIGINAL
8 11
1
X
AUTO
/
2
EXPOSURE
TO
8 1 11
X
/
2
PER SELECT
100 %
3 Make all other desired settings such as exposure,
paper size and number of copies and then press
the [START] key.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
I When step 3 is completed, a copy job icon will appear
at the top of the job icon queue at the left side of the
screen and interrupt copying will start. After the
interrupt job is completed, the interrupted job will
automatically resume.
28
When it is possible to
interrupt a print or copy job
in progress, the
[INTERRUPT] key will
appear as shown in the
illustration.
When the [INTERRUPT]
key is touched in step 2, the
[INTERRUPT] touch key will
be replaced by the
[CANCEL] key as shown in
the illustration. To cancel
interrupt copying at any
time, touch the [CANCEL]
key.
When using the document
glass, replace the original
with the next original and
press the [START] key.
Repeat this operation until
all originals have been
scanned. Then, touch the
[READ-END] key.