Selecting The Resolution; Change The Resolution; Resolution Settings - Sharp LASER PRINTER Operation Manual

SCANNING SETTINGS (ORIGINAL SIZE, RESOLUTION, AND EXPOSURE)

SELECTING THE RESOLUTION

After loading the original, you can adjust the resolution as needed for the type of original and the size of the letters on
it. After loading the original in scanner mode, adjust the settings as explained below. The initial resolution setting is
STANDARD.
I Change the resolution.
1
Touch the RESOLUTION key.
STANDARD
RESOLUTION
AUTO 8 X11 1 /
2
ORIGINAL
2
Touch the desired resolution key.
STANDARD
FINE
SUPER FINE HALF TONE
ULTRA FINE
3
Touch the OK key.
OK
DARD
NE
HALF TONE
FINE
FINE
NOTES
• The initial factory resolution setting is Standard. If desired,
you can change the initial setting to a different setting
using the key operator program. (Refer to page 26.)
• When using the automatic document feeder, the
resolution setting cannot be changed once scanning has
begun.
14
The selected key is
highlighted. If you selected
FINE, SUPER FINE, or
ULTRA FINE, you can also
touch the HALF TONE key
to select halftone.
You will return to the initial
screen.
I Resolution settings
Touch this key if your original consists of
Standard
normal-sized characters (like those in
this manual).
Touch this key if your original has small
characters or diagrams. The original will
Fine
be scanned at twice the resolution of the
Standard setting.
Touch this key if your original has intri-
cate pictures or diagrams. A higher-qual-
Super fine
ity image will be produced than with the
Fine setting.
Touch this key if your original has intri-
cate pictures or diagrams. This setting
Ultra fine gives the best image quality. However,
transmission will take longer than with
the other settings.
Touch this key if your original is a photo-
graph or has gradations of color (such as
a color original). This setting will produce
Half tone
a clearer image than Fine, Super fine, or
Ultra fine used alone. Half tone cannot be
selected if Standard has been selected.