Transmission By Auto-Dialing; Transmitting A Two-Sided Document - Sharp LASER PRINTER Operation Manual

Laser printer
Hide thumbs Also See for LASER PRINTER:
Table of Contents

Advertisement

TRANSMISSION BY AUTO-DIALING

To send a document by auto-dialing (one-touch dialing or group dialing) instead of entering a full fax number with the
numeric keys, follow the steps below. To use an auto-dial destination, you must first program the full fax number and
name of the destination. Refer to page 1-11 for information on auto-dialing and pages 6-3, 6-6 for information on
programming auto-dial destinations.
1
Perform steps 1 through 5 of "Basic Procedure
for Sending Faxes" (page 2-2).
2
Touch the ADDRESS DIRECTORY key.
AKER
REDIAL
Y:100%
ADDRESS
EPTION
DIRECTORY
SUB ADDRESS

TRANSMITTING A TWO-SIDED DOCUMENT

A two-sided document can be automatically transmitted using the auto document feeder. Follow the steps below to
automatically send a two-sided document.
1
Make sure the machine is in fax mode and then
load the document in the auto document feeder
(page 1-7).
2
Touch the ORIGINAL key.
STANDARD
RESOLUTION
AUTO
8 X11
1 /
2
ORIGINAL
3
Touch the 2-SIDED BOOKLET key or the 2-
SIDED TABLET key as appropriate for the
original you loaded.
SPEAKER
ORIGINAL SIZE
AUTO
MANUAL
2-SIDED
2-SIDED
BOOKLET
TABLET
NOTES
• Booklets and tablets
Two-sided originals that are bound at the side are booklets, and two-sided originals
that are bound at the top are tablets.
• Two-sided scanning turns off after the document is stored in memory. Pressing the
CA key will also cancel two-sided scanning.
The address directory
screen appears.
When
you
touch
the
ORIGINAL key, check the
original size displayed in the
key.
If necessary, touch the
MANUAL key and set the
original size. (Page 1-8)
3
Touch the one-touch key for the desired
destination.
READY
TO SEND.
SHARP CORPORATION
T.P.S.
SHARP GROUP
FREQUENT USE
ABCD
EFGHI
JKLMN
OPQRS
4
Continue from step 7 of "Basic Procedure for
Sending Faxes" (page 2-3).
4
Touch the OK key.
KER
REDIAL
OK
L
ED
A two-sided original icon appears next to the ORIGINAL key.
(Example: The icon that appears when the 2-SIDED
BOOKLET key is touched.)
STANDARD
RESOLUTION
AUTO
8 X11
1 /
2
ORIGINAL
5
Continue from step 4 of "Basic Procedure for
Sending Faxes" (pages 2-2 to 2-3)
Booklet
SENDING A FAX
Refer to page 1-5 for
S
information on using the
address directory screen.
The key you touched is
highlighted. If you touch the
wrong key, touch the key
again
to
cancel
the
selection. The key display
will return to normal.
You will return to the initial
screen.
Tablet
2-5
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents