Selecting The Exposure; Change The Exposure - Sharp LASER PRINTER Operation Manual

SELECTING RESOLUTION AND EXPOSURE SETTINGS

SELECTING THE EXPOSURE

The initial exposure setting is AUTO. To change the setting, follow these steps:

Change the exposure.

1
Touch the SPECIAL MODES key.
SPECIAL MODES
STANDARD
RESOLUTION
2
Touch the EXPOSURE key.
R POLLING
PAGE
EXPOSURE
CAN
3
Touch the desired exposure key.
DARK LIGHT
AUTO
ORIGINAL ORIGINAL
4
Touch the outer OK key.
OK
OK
LIGHT
1-10
The selected key is
highlighted.
You will return to the initial
screen.
NOTE
When using the document glass to scan pages an original,
the exposure setting can be changed each time you change
pages. When using the automatic document feeder, the
exposure setting cannot be changed once scanning has
begun.
Exposure settings
Dark Select this setting if your original consists
Original mostly of dark characters.
This setting automatically adjusts the ex-
Auto posure for light and dark parts of the origi-
nal.
Light Select this setting if your original consists
Original mostly of faint characters.