Sharp LASER PRINTER Operation Manual page 84

FINISHER
Stapling position quick reference list
When stapling is performed, the orientation of image data or original is related to the stapling position, binding position
and orientation of paper complicatedly. The table below shows the relation.
First page (front side) Second page (reverse side)
NOTES
G When using the stapling function, select the offset tray as an exit tray. If another tray is selected, the stapling
function cannot be used.
G
Select only one paper size. If different sizes are included, stapling cannot be performed.
NOTE
The following types of paper cannot be stapled.
Pre-punched paper, transparency film, heavy paper, label, envelope, postcard
5-16
Image data or original
Two sides
Result
One-position stapling Two-position stapling
One-position stapling
Two-position
stapling with top
binding cannot be
made.
One-position stapling Two-position stapling
One-position stapling
Two-position
stapling with left
binding cannot be
made.
One-position stapling Two-position stapling
One-position stapling
Two-position
stapling with right
binding cannot be
made.
indicates stapling positions.