Staple Jam Removal - Sharp LASER PRINTER Operation Manual

SADDLE STITCH FINISHER
Insert the staple box.
8
Push back the stapler section.
9
I Staple jam removal
Open the front cover.
1
Turn roller rotating knob C as shown in the
2
illustration until a blue indication is seen.
Roller rotating
knob C
Blue
Remove the paper from the stapler
3
compiler.
Open the saddle stitch section cover (when
4
the saddle stitch function is used).
5-22
Push the staple box until it
clicks into place.
Close the front cover.
10
NOTE
Execute test printing in the staple sort mode to ensure
that stapling is performed properly.
Remove the misfed paper.
5
Close the saddle stitch section cover.
6
Open the saddle stitch section cover (when
7
the saddle stitch function is used).
Turn roller rotating knob A in the direction
8
of the arrow to move the staple unit to your
side.
Roller rotating knob A
Staple unit