Manual Selection - Sharp LASER PRINTER Operation Manual

Manual selection

1
Place the original in the document feeder tray
or on the document glass. (page 7)
NOTE
When the document feeder is being used, the available
copy ratio range is 25% to 200%.
2
Touch the [COPY RATIO] key.
100 %
COPY RATIO
3
Select the desired copy ratio by touching a fixed
copy ratio key for reduction or enlargement and
touch the [OK] key. Use the
make fine adjustments as needed.
100
%
25 % ZOOM 400 %
11 17 8 1 11
x x
/ 64 121
2 % 8 1 14 11 17 %
x x
/
8 11 5 8 2
1 x 1 1
x
/ / /
2 2 2
8
11 17 x 8 1 14 1 11 11 17
x x x
/
/ 2
2 77 % 129 %
8 8
8 1 14 1 11 5 1 8 1 1 11
x x x x
/ / / / /
2 2 2 2 2
4
Ensure that the desired paper size has been
automatically selected based on the selected
copy ratio or select another size as needed.
P PER SELECT
77 %
COPY RATIO
The preset copy ratio keys
for reduction and
enlargement, the keys for
[ZOOM] and the [100%] key
will be displayed.
and keys to
If the message "IMAGE IS
LARGER THAN THE COPY
OK
PAPER." appears, image
10
loss will occur. In this case
either continue with image
AUT
IMAG
loss or change the copy
paper size or copy ratio.
If another size paper is
selected, the auto paper
select display will be
cleared.
REDUCTION/ENLARGEMENT/ZOOM
5
Make all other desired settings such as exposure
or the number of copies and press the [START]
key.
When copying from the
document glass in the sort
mode, touch the [READ-
END] key after all originals
have been scanned. (step
7 on page 13)
17